Monel

Our monel products is available in a variety of shapes and sizes, both pre-cut and custom forged. This product is available in form of monel pipes tubes, fittings, sheets, plates, coils, round bars, flanges and fasteners etc. Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems

Size
½” NB TO 24” NB IN SCH 20 , 30, STD, 40 , 60 , 80 , XS , 100 , 120 , 140 , 160 & XXS as Per NACE MR 01 75

Grade
Monel - 400
Monel - 500

Grades
Monel 400 (UNS No. N04400) Monel 500 (UNS No. N05500)
Size Available
6.35 mm OD up to 254 mm OD in 0.6 TO 20 mm
Type
Seamless
ERW
Welded in Round & Square

Our monel sheet & plates is available in different sizes with thickness varying from 0. 1 mm to 150 mm.

Range
0. 5 mm to 200 mm thick in 1000 mm to 2500 mm width & 2500 mm to 12500 mm length available with nace mr 01-75
Grades
Monel 400 (uns no. N04400), monel 500 (uns no. N05500).
Size Available
0.1 mm thickness to 150 mm thickness
1000 mm x 2000 mm
1220 mm x 2440 mm (4' x 8')
1220 mm x 4880 mm
1250 mm x 2500 mm
1500 mm x 3000 To 6300 mm
2000 mm x 2000 To 10000 mm

Monel rod /bars is available in different forms and sizes. All our products are offered as per the international standards. With the assistance of our experts and professionals.

Range
6 mm dia to 200 mm dia in 100 mm to 6000 mm length.
Grades
Monel 400 (uns no. N04400), monel 500 (uns no. N05500).

We are catering a qualitative range of monel flanges which are available in various forms and standards. These flanges are available in different sizes and are in compliance with international standards. We offer these flanges in various specifications and thus are demanded in both domestic and international markets. We offer these flanges at market leading prices

Grades
Monel 400, Monel k500
Range
1/2” NB to 60” NB
Types
Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectacle, Ring Joint
Features
• Durability
• Corrosion resistance
• Dimensional accuracy
• High strength
• Chemical resistance
• Excellent finish

Range
15 nb to 100 nb in 3000 lbs, 6000 lbs, 9000 lbs available with nace mr 01-75
Grades
Monel 400 (uns no. N04400), Monel 500 (uns no. N05500)
Size Available
½" NB to 24 "NB in SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS. Such as 90° ELBOW ( LONG RADIUS / SHORT RADIUS ), EQUAL TEE, 45° ELBOW ( LONG RADIUS / SHORT RADIUS ), REDUCING TEE, ROUND CAP, CONCENTRIC REDUCER, ECCENTRIC REDUCER, STUB END (short/long), coupling (half/full)
Types
Elbow 90 deg, elbow 45 deg, cross, tee, coupling, half coupling & cap.